CyberData 011186 Bedienungsanleitung PDF herunterladen (Seite 88)

Operations Guide 930796L CyberData Corporation

Installing the VoIP Outdoor Intercom

Intercom Setup

4. Click on the Firmware menu button to open the Firmware page. See Figure 2-35.

GENERAL ALERT

Caution

Figure 2-35. Firmware Page

5. Click on the Br

owse button, and then navigate to the location of the firmware file.

6. Select the firmware file.

7. Click on the Upload b

utton.

Note Do not reboot the d

evice after clicking on the Upload button.

Note This starts the upg

rade process. Once the Intercom has uploaded the file, the Uploading

Firmware countdown page appears, indicating that the firmware is being written to flash.

The Intercom will automatically reboot when the upload is complete. When the countdown

finishes, the Firmware page will refresh. The uploaded firmware filename should be

displayed in the system configuration (indicating a successful upload and reboot).

8. Ta bl e 2-24 shows the web page items on the Fir

mware page.

Web Page Item Description

Current Firmware Version Shows the current firmware version.

Use the Br

owse button to navigate to the location of the

Intercom firmware file that you want to upload.

Click on the Upload b

utton to automatically upload the selected

firmware and reboot the system.

Equipment Hazard: CyberDa

ta strongly recommends that you first reboot the

device before attempting to upgrade the firmware of the device. See Section 2.5.2,

"Reboot the Device".

Table 2-24. Firmware Parameters

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 115 116

Keine Kommentare

CyberData 011186 Bedienungsanleitung Seite 88