CyberData 011186 Bedienungsanleitung PDF herunterladen (Seite 50)

Operations Guide 930796L CyberData Corporation

Installing the VoIP Outdoor Intercom

Intercom Setup

2.4.7.2 Point-to-Point Configuration

When the device is set to not register with a SIP server (see Figure 2-21), it is possible to set the

device to dial out to a single endpoint.

In this case, the dial-out extension should be the IP address of the remote device. The device can

also receive Point-to-Point calls. The delayed DTMF functionality is available in the Point-to-Point

Mode.

Note Receiving point-to-point SiP calls may not work with all phones.

Figure 2-21. SIP Page Set to Point-to-Point Mode

Device is set to NOT register with a SiP server

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 115 116

Keine Kommentare

CyberData 011186 Bedienungsanleitung Seite 50