CyberData 011123x Spezifikationen PDF herunterladen (Seite 43)

Operations Guide 930370M CyberData Corporation

Installing the VoIP Indoor Intercom with Keypad (Flush-Mounted)

Parts List

Security Dial Mode

Enable Security Keypad Operation Select Enable Security Keypad Operation to put the

Intercom into Security Dial Mode. In Security Dial Mode,

the Intercom will act like a normal, one-button Intercom by

calling the extension specified in the Call Button field.

When a security code is entered on the keypad that

matches one of the seven-digit fields specified on the

page, the relay will be activated.

• This mode is meant for installation with security doors. In

Security Dial Mode, the Intercom will act like a normal,

one-button Intercom by calling the extension specified in

the Call Button field.

• Up to 10 (7-digit maximum) security codes can be

registered with the device. Enter a security code by

pressing the # key before entering the code. When one of

these codes is typed on the keypad, it will activate the

relay for the Relay Activation Timeout (in seconds)

setting.

• It is possible to enter a security code both inside and out

of calls.

• In this mode normal relay operation is suspended and

the following settings are non-operational:

Relay On Button Press,

Relay During Call Active

Relay During Ring

Relay During Night-ring

• In this mode, you can't send dtmf to a remote extension

using the keypad. You can however setup delayed dtmf

tones in the dial out string.

Relay Activation Timeout (in seconds) Type the desired length of time (in seconds) that you want

the relay to remain activated after a security code is

entered.

Play Tone While Relay is Active Check this box to play an audible tone while the relay is

activated.

Allow Telephone Dialout When the Allow Telephone Dialout option is enabled,

you can use the keypad to place calls to a dialed

extension. To call an extension, dial the number and wait.

You can still enter security codes with the Allow

Telephone Dialout option enabled by pressing the # key

before entering the code.

With the Allow Telephone Dialout option disabled, all

keypad input will be treated as security input. You can still

use the # key but it is not necessary.

For information about how to instantly triggering a dialout

call or security code, see

Section 2.3.6.2, "Triggering a

Dialout Call or Security Code".

Table 2-11. Button Configuration Parameters (continued)

Web Page Item Description

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 85 86

Kommentare zu diesen Handbüchern

Keine Kommentare

CyberData 011123x Spezifikationen Seite 43

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Türsprechanlagen CyberData 011123x