CyberData 011123x Spezifikationen PDF herunterladen (Seite 31)

Operations Guide 930370M CyberData Corporation

Installing the VoIP Indoor Intercom with Keypad (Flush-Mounted)

Parts List

2. On the Device Configuration page, you may enter values for the parameters indicated in

Ta b l e 2-8.

Table 2-8. Device Configuration Parameters

Web Page Item Description

Volume Settings

Speaker Volume Type the desired speaker volume level into this field.

Microphone Gain Type the desired microphone gain level into this field.

Relay Settings

Activate Relay with DTMF Code When selected, the relay can be activated with a DTMF

code.

DTMF Activation Code Type the desired DTMF activation code 

(25 character limit).

DTMF Activation Duration (in seconds) Type the desired DTMF activation duration (in seconds) (2

character limit [activation times now go up to 99 seconds]).

NOTE: A DTMF activation duration of 0 will toggle the

relay indefinitely or until the activation code is sent again

Activate Relay During Ring When selected, the relay will be activated for as long as

the call is active.

NOTE: When the phone is set to Auto Answer, it will not

ring and this option does nothing.

Activate Relay During Night Ring Check this box to activate the relay for as long as a Night

Ring tone is ringing.

Activate Relay While Call Active When selected, the relay will be activated for as long as

the call is active.

Activate Relay on Button Press When selected, the relay will be activated when the Call

Button is pressed.

Relay on Button Press Timeout (in seconds) Type the desired time (in seconds) that you want the relay

to activate after the Call Button is pressed (1 character

limit).

Miscellaneous Settings

Auto-Answer Incoming Calls When selected, the device will automatically answer

incoming calls.

When Auto Answer is Off, the device will play a ringtone

through the Intercom speaker until someone presses the

button.

Button Lit When Idle When selected, the Call Button remains lit when idle.

Play Ringback Tone When selected, you will hear a ringback tone while making

a call.

Volume Boost When Volume Boost is enabled, the device will play at a

higher volume at the risk of having the audio clip at very

high levels.

Click on the Test Audio button to do an audio test. When

the Test Audio button is pressed, you will hear a voice

message for testing the device audio quality and volume.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 85 86

Kommentare zu diesen Handbüchern

Keine Kommentare

CyberData 011123x Spezifikationen Seite 31

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Türsprechanlagen CyberData 011123x