CyberData 011035 Spezifikationen PDF herunterladen (Seite 45)

Installing the VoIP Emergency Intercom

Configure the SIP Parameters

Operations Guide 930279W CyberData Corporation

2.3.5.2 Point-to-Point Configuration

When the board is set to not register with a SIP server (see Figure 2-20), it's possible to set the

intercom to dial out to a single endpoint.

In this case, the dial-out extension should be the IP address of the remote device. The Intercom can

also receive Point-to-Point calls. The delayed DTMF functionality is available in the Point-to-Point

Mode.

Note Receiving point-to-point SiP calls may not work with all phones.

Figure 2-20. SIP Configuration Page Set to Point-to-Point Mode

Intercom is set to NOT register with a SiP server

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 90 91

Keine Kommentare

CyberData 011035 Spezifikationen Seite 45