CyberData 011035 Spezifikationen PDF herunterladen (Seite 41)

Installing the VoIP Emergency Intercom

Configure the Network Parameters

Operations Guide 930279W CyberData Corporation

2. On the Network Configuration page, enter values for the parameters indicated in Table 2-8.

3. After changing the parameters, click Save Settings. This updates the changed parameters and

reboots the Intercom if appropriate.

4. Connect the Intercom to the target network.

5. From a system on the same network as the Intercom, open a browser with the new IP address of

the Intercom.

Table 2-8. Network Configuration Parameters

Web Page Item Description

IP Addressing Select either DHCP IP Addressing or Static IP Addressing by

marking the appropriate radio button. If you select Static, configure

the remaining parameters indicated in

Table 2-8. If you select DHCP,

go to Step 3.

Network Settings

IP Address Enter the Static IP address.

Subnet Mask Enter the Subnet Mask address.

Default Gateway Enter the Default Gateway address.

DNS Server 1 Enter the DNS Server 1 address.

DNS Server 2 Enter the DNS Server 2 address.

Current Network Settings Shows the current network settings.

IP Address Shows the current Static IP address.

Subnet Mask Shows the current Subnet Mask address.

Default Gateway Shows the current Default Gateway address.

DNS Server 1 Shows the current DNS Server 1 address.

DNS Server 2 Shows the current DNS Server 2 address.

Click the Save button to save your configuration settings.

Note: You need to reboot for changes to take effect.

Click on the Reboot button to reboot the system.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 90 91

Keine Kommentare

CyberData 011035 Spezifikationen Seite 41