CyberData VoIP Paging Gateway Bedienungsanleitung PDF herunterladen (Seite 2)

Known Integration Issues

Known integration issues include:

Supervised transfers cannot be completed. Transferring a caller to the paging speaker indicates a

successful transfer even though the transfer was incomplete.

Preparation

This section provides instructions on applying firmware updates, if necessary, and setting up the device

for manual configuration.

PC Network Settings

The factory default on CyberData products is a static IP address. To access the device, you must change

your PC to the same subnet.

NOTE: Make a note of the original network settings before making any changes. You must restore these

settings after changing the network configuration on the paging server.

To change the IP address of your computer, do the following:

For Windows® Server 2003/Windows XP:

1. Select Start > Control Panel.

2. If you have the Classic View, select Network Connections. If you have the Category View,

select Network and Internet Connections, and then select Network Connections.

3. Double-click your active LAN or Internet connection.

4. Select Properties.

5. In the General tab, highlight the Internet Protocol (TCP/IP) item, and select Properties.

6. In the General tab, select Use the following IP address, and enter:

IP Address 192.168.3.1

Subnet Mask 255.255.255.0

Default Gateway 192.168.3.10

7. Select OK.

1 2 3 4 5 6 7 ... 11 12

Keine Kommentare

CyberData VoIP Paging Gateway Bedienungsanleitung Seite 2