CyberData 011280 Spezifikationen PDF herunterladen (Seite 20)

Installing the Singlewire Paging Adapter

Connecting the Singlewire Paging Adapter

Operations Guide 930729A CyberData Corporation

2.3.7 Restore the Factory Default Settings

The Singlewire Paging Adapter is delivered with factory set default values for the parameters in

Ta b l e 2-3. Use the RT

FM switch (see Figure 2-10) on the back of the unit to restore these

parameters to the factory default settings.

Figure 2-10. RTFM Switch

Note Wh

en you perform this procedure, the factory default settings are restored. The default

parameters for access are shown in Tabl e 2-3.

To restore these parameters to the factory default settings:

1. Press and hold the RT

FM switch until the status and paging lights come on.

2. Continue to press the switch until after the indicator lights go off, and then release it.

Note The “Restoring Defaults

” announcement can be heard if a speaker or amplified speaker is

connected to the unit.

3. The Singlewire Paging Adapter settings are restored to the f

actory defaults.

Table 2-3. Factory Default Settings

Parameter Factory Default Setting

IP Addressing DHCP

IP Address

a. Default if there is not a DHCP server present.

10.10.10.10

Web Access Username admin

Web Access Password admin

Subnet Mask

255.0.0.0

Default Gateway

10.0.0.1

RTFM Switch

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 44 45

Keine Kommentare

CyberData 011280 Spezifikationen Seite 20