CyberData 011272 Bedienungsanleitung PDF herunterladen (Seite 34)

Server Setup Guide 930281B CyberData Corporation

4. For a quick summary of all of the necessary settings on the SIP Setup page (Figure 4-32), see

Table 5-1. For a step-by-step description of the necessary settings, go to Step 5. If a setting

parameter is not listed in Table 5-1, then your input for that setting parameter is not required to

complete this procedure.

5. On the SIP Setup page (Figure 4-32), complete the following steps:

•In the SIP Server field, type the address of the Call Manager box.

•In the SIP User ID field, type the directory number that you wrote down in Step 2 of Section

4.7, "Create a New Directory Number (DN) and Associate it with the New Phone Device".

•In the Authentication ID field, type the Cisco User ID name that you typed into the

Description field in

Step 3 of Section 4.5, "Setup a New User in Cisco Call Manager".

•In the Password field, type in a password.

•For Register with a SIP Server, make sure that this box is checked.

•For Unregister on Reboot, make sure that this box is checked.

•In the Re-registration interval (in seconds) field, type 120.

•In the Dial out Extension field, type an extension number that you want the Intercom to

call.

6. Click on the Save button.

Table 5-1. SIP Setup Page Settings

SIP Setup Page Items Setting

SIP Server field Type the address of the Call Manager box.

SIP User ID field Type the directory number that you wrote down in

Step 2 of Section 4.7, "Create a New Directory

Number (DN) and Associate it with the New Phone

Device".

Authenticate ID field Type the Cisco User ID name that you typed into the

Description field in Step 3 of Section 4.5, "Setup a

New User in Cisco Call Manager".

Authenticate Password field Type in a password.

NOTE: Be sure to type a password at the login prompt

or else the Intercom will not be registered after the

reboot in this procedure.

Unregister on Reboot field Make sure that this box is checked.

Re-registration interval (in seconds) field Type 120.

Dial out Extension field Type an extension number that you want the Intercom

to call.

Save button Click on the Save button only after you have finished

configuring all of the settings on the SIP Setup page.

1 2 ... 29 30 31 32 33 34 35

Keine Kommentare

CyberData 011272 Bedienungsanleitung Seite 34