CyberData 011272 Spezifikationen PDF herunterladen (Seite 39)

Operations Guide 930853D CyberData Corporation

Installing the VoIP Flush-Mount Indoor Intercom

Intercom Setup

2.4.6.2 Point-to-Point Configuration

When the board is set to not register with a SIP server (see Figure 2-16), it's possible to set the

intercom to dial out to a single endpoint.

In this case, the dial-out extension should be the IP address of the remote device. The Intercom can

also receive Point-to-Point calls. The delayed DTMF functionality is available in the Point-to-Point

Mode.

Note Receiving point-to-point SiP calls may not work with all phones.

Figure 2-16. SIP Configuration Page Set to Point-to-Point Mode

CyberData Indoor Intercom

Intercom is set to NOT register with a SiP server

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 85 86

Keine Kommentare

CyberData 011272 Spezifikationen Seite 39