CyberData 011214 Spezifikationen PDF herunterladen (Seite 41)

Installing the VoIP V3 Outdoor Intercom with Keypad

Intercom Setup

Operations Guide 930522C CyberData Corporation

2.4.6.1 Point-to-Point Configuration

When the board is set to not register with a SIP server, it's possible to set the device to dial out to a

single endpoint. To do this, do the following:

1. On the SIP Configuration page (Figure 2-15), make sure that the Register with a SIP Server

parameter is not selected.

Figure 2-15. SIP Configuration Page Set to Point-to-Point Mode

Intercom is set to NOT register with a SiP server

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 96 97

Keine Kommentare

CyberData 011214 Spezifikationen Seite 41