RingCentral Office 3 To contact RingCentral, please visit www.ringcentral.com or call 1-800-574-5290.
Introduction
RingCentral does not currently offer native support for intercom and paging systems. Some third-party VoIP- and
SIP-based intercom and paging systems work with RingCentral service as third-party devices. RingCentral cannot
provide full support for these devices; we have documented the basic configuration of one such system sold by
CyberData. Get more information on CyberData system, including where to purchase, here: http://www.cyberdata.
net/products/voip/digitalanalog/index.html. The website includes product videos and other information to help you
learn about the system’s capabilities.
CyberData products are highly capable and flexible, and can meet a variety paging and intercom needs. In this
document we discuss configuring CyberData products for basic use, and connecting them to your RingCentral ac-
count. For more complex configuration and assistance, please review the manufacturer’s documentation included
with your CyberData product, or contact CyberData and their authorized vendors.
The following products are covered in this document:
Ceiling Speaker v2•
Configuration would be nearly identical for the wall mount speaker with clock ◦
There is a new ceiling speaker scheduled for release that includes two-way talkback – the configura- ◦
tion will likely be very similar
Outdoor intercom•
Configuration would be nearly identical for the indoor intercom and emergency indoor intercom ◦
Paging amplifier v2•
Configuration would be nearly identical for the Loudspeaker amplifier ◦
Paging server•
What are the products?
V2 ceiling speaker
This ceiling-mounted speaker can broadcast announcements in a large room.
Connect an additional analog speaker to extend the range and broadcast the same audio at lower cost. •
Use a speaker from CyberData, or a compatible speaker from a third-party. See the CyberData website
for specifications of the wire gauge and speaker. Use the wired connection located on the back of the
ceiling speaker for this hookup.
Connect line-level output to an amplifier and run it to any number of additional speakers. These addi-•
tional speakers will broadcast the same audio as the main speaker they are connected to. Use the wired
connection located on the back of the ceiling speaker for this hookup.
Approximate price: $300•
Use it as its own extension, or use multicast to aggregate several to-•
gether with a VoIP paging server. If you need more than one speaker, use
the VoIP paging server to aggregate your speakers or connect standard
analog speakers to this speaker so you won’t have to purchase ad-
ditional VoIP lines.
Configure it using a web interface.•
Runs using Power over Ethernet (PoE). You’ll need a PoE-capable switch •
to power the device. See our article on recommended switches.
(72 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern