CyberData 011097 Spezifikationen PDF herunterladen (Seite 35)

Installing the VoIP V2 Loudspeaker Amplifier

Configure the Loudspeaker Amplifier Parameters

Operations Guide 930362E CyberData Corporation

3. After changing the parameters, click Save to save the settings.

SIP Settings

SIP Server* Type the SIP server represented as either a numeric IP address in dotted

decimal notation or the fully qualified host name (64 character limit

[FQDN]).

Remote SIP Port* Type the Remote SIP Port number (default 5060)

(0 - 65535).

Local SIP Port* Type the Local SIP Port number (default 5060)

(0 - 65535).

Outbound Proxy Type the Outbound Proxy as either a numeric IP address in dotted decimal

notation or the fully qualified host name

(64 character limit [FQDN]).

Outbound Proxy Port Type the Outbound Proxy Port number (0 - 65535).

SIP User ID* Type the SIP User ID (up to 25 alphanumeric characters).

Authenticate ID* Type the Authenticate ID

(up to 25 alphanumeric characters).

Authenticate Password* Type the Authenticate Password (up to 25 alphanumeric characters).

Re-registration Interval

(in seconds)*

Type the SIP Registration lease time in seconds

(default is 120 seconds) (range is 100 - ?).

Unregister on Reboot* • When selected, the Loudspeaker Amplifier automatically unregisters

when it is rebooted.

• When not selected, the Loudspeaker Amplifier remains registered when it

is rebooted.

Buffer SIP Calls When this is enabled, SIP calls to the speaker will be stored in memory and

will play when either the call is terminated or the buffer is full. The receive

buffer is 2MB in size and this is equal to about four minutes of ulaw

encoded audio.

Beep Before Page Enable/Disable the tone (beep) before each page.

RTP Settings

RTP Port (even) Specify the port number used for the RTP stream after establishing a SIP

call. The RTP port has to be an even number between 0 and 65534. This

port can be programmed for people who are not working on a local LAN,

but who want to have outside access. Instead of RTP port being a random

port, it will be set up so that only two ports can be opened in a firewall.

Note: The RTP port number has to be an even number because the control

port is always one port number higher. Therefore, audio will go through the

port number that you enter into the RTP port field, but the RTP control

signals will go through a port that is one number higher than the RTP port

field.

Click the Save button to save your configuration settings.

Note: You need to reboot for changes to take effect.

Click on the Reboot button to reboot the system.

Table 2-13. SIP Configuration Parameters (continued)

Web Page Item Description

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 72 73

Kommentare zu diesen Handbüchern

Keine Kommentare

CyberData 011097 Spezifikationen Seite 35

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audioverstärker CyberData 011097